Skip to main content

Articles

ESP Insights

Latest thinking on ESP design, optimization, run life, failure analysis, and more.

Showing 8 results

Jul 19, 2026•Field Service

An Extra Set of Expert Eyes: How One Damaged Pothead Boot Nearly Cost a Motor

A damaged pothead boot caught before running in hole — why half a day of rig time beats a short run, rig remobilization, and tens of thousands in avoidable costs.

J
James BritvarEngineer
Jul 12, 2026•Reliability Engineering

Lead Washers: The Small Component That Decides ESP Run Life

Up to 30 lead washers seal wellbore fluids out of the seal section and motor — without verified compression during assembly, premature failure is inevitable.

J
James BritvarEngineer
Jul 05, 2026•Field Service

Winter Is Coming — Prevent ESP Freeze Damage

Water trapped inside a pump during transport or storage can fracture bearings, deform diffusers, and break impellers — prevention measures for cold-weather operations.

J
James BritvarEngineer
Jun 28, 2026•Well Monitoring

Taming Amp Swings: ESP Optimization Lessons from Our ALARM Team

Operational efficiency means balancing maximum drawdown with system integrity — practical tubing-pressure, speed-step, and PID tips for stabilizing motor current.

C
Christopher TimberlakeEngineer
Jun 21, 2026•Reliability Engineering

Reusing ESP Cable with Confidence: Inspection and Handling Best Practices

ESP cable is the single most expensive component of an onshore installation — field-proven inspection and handling practices that let you re-run it without premature failures.

J
James BritvarEngineer
Jun 14, 2026•Production Engineering

Tubing and Casing Pressure: Critical Variables for Optimizing ESP Performance

Why a 150–250 psi tubing-to-casing differential keeps free gas out of your pumps, and how too much tubing pressure quietly stresses the motor and VSD.

C
Christopher TimberlakeEngineer
Jun 07, 2026•Production Engineering

What Is the Best Approach to High-Performing ESP Designs?

Garbage in equals garbage out — why bulletproof ESP designs demand more than cookie-cutter software outputs, plus a checklist for running rigorous design projects.

B
Branden PronkEngineer
May 31, 2026•Production Engineering

After an ESP Failure in Low Bottom-Hole Pressure, High-Gas Wells: Run Another ESP or Take the Production Hit?

Why the knee-jerk move to a smaller pump often backfires in gassy, low-pressure wells — and the design questions to ask before accepting the first ESP recommendation.

J
James BritvarEngineer